Skip to content

Announcement: Introducing HL5098: High-Performance USB 2.0 D+/D- Protector for Mobile Devices

Overview

HL7095 is a fully integrated switch-mode Li-ion battery chargers with power FETs, power path management, I²C interface, reverse boost function. It can be used with single cell or multiple-cell in parallel Li-ion and Li-polymer batteries in a wide range of wearable devices, smart phones, tablets, power banks and other portable devices. Its switch-mode operation and low-resistance power path maximize charging, discharging and boost efficiency, reduce battery charging time and extend battery life during the discharging phase.

This device supports a wide range of input sources, including standard USB host port, USB charging port and AC-DC adapter. It supports an input operating voltage from 4V to 12V and can power up the system rail without a battery. It can automatically adjust to the maximum power output of the input source via the input dynamic power management control (INDPM).

HL7095 integrates comprehensive protections mechanism to ensure safe operation of the battery, including battery temperature monitoring via negative temperature coefficient (NTC) thermistor, charging safety timer, over-voltage and under-voltage detection. The device also provides output over-current protection and regulates its on-chip junction temperature (TJ_REG) to be no more than thermal regulation threshold by regulating its charging current.

HL7095 is available in a 2.17mm x 2.57mm 30 balls WLCSP package.

For more detailed description of the device, please download a product brief.

Features

  • 20V Input Voltage Tolerance, 4V–12V Operating Voltage Range
  • High Efficiency 3.0A Switching Charger
    • ≥92% Charge Efficiency at 0.5A to 1.2A
    • ≥89% Charge Efficiency at 1.5A/2A
  • USB-Compliant Input Current Limit
    • USB1.0/2.0/3.0 Compliant Input Current Limit
    • 0.1A to 3.2 A Programmable Input Current Limit
  • Autonomous Preconditioning /CC/CV/Termination Charge Control and Auto Re-Charge
  • 65MHz Synchronous PWM converter for Small Inductor
  • Reverse Boost Programmable Output: 4.0V to 10.3V
    • 3A output capability for 3.5V to 7.5V
    • ≥90% Efficiency at 10mA/100mA for 3.8V to 5.0V conversion
    • ≤60uA IQ for Reverse Boost with LDOs and Watchdog enabled.
    • Hiccup Mode Over-Current Protection for OTG Mode
    • Startup with 300uF Capacitive Load
  • Power Path Management
    • Instant System ON with No/Depletion Battery
    • Input Voltage/Current DPM Regulation
    • Battery Assistant Mode
    • System Reset and Battery Disconnect

Block Diagram

HL7095 - HMI Main Photo

For more information or a full datasheet request, please contact the factory at sales@hmisemi.com.

Related Products

Part Description
HL7005D 1.7A Li-Ion Battery Switching Charger with Integrated OTG Boost
HL7015 4.5A I²C Controlled USB/Adapter Li-Ion Battery Charger with Power Path and 2.1A OTG Boost
HL7019 3A I²C Controlled USB/Adapter Li-Ion Battery Charger with Power Path and 2.1A OTG Boost
HL7019D 3A I²C Controlled USB/Adapter Li-Ion Battery Charger with Power Path and 2.1A OTG Boost
HL7061 5V/3A 2/3S Li-Ion Battery Charger with 5.4A Buck Output
HL7090 900mA Li-Ion Battery Switching Charger, Dual Channel Input, Integrated Boost SOC